View 30TPS08_65536.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin I2136 04/97
SAFEIR Series 30TPS..
PHASE CONTROL SCR VT ITSM
< 1.3V @ 20A = 300A
VRRM 800 to 1600V
Description/Features
The 30TPS.. SAFEIR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines.
Major Ratings and Characteristics Characteristics
I T(AV) Sinusoidal waveform I RMS VRRM/ VDRM I TSM VT dv/dt di/dt TJ @ 20 A, TJ = 25C 30 up to 1600 300 1.3 500 150 - 40 to 125 A V A V V/s A/s C
Package Outline Units
A
30TPS..
20
TO-247AC
1
30TPS.. SAFEIR Series
Bulletin I2136 04/97
Voltage Ratings
Part Number VRRM/VDRM, max. repetitive peak and off-state voltage V
30TPS08 30TPS12 30TPS16 800 1200 1600
VRSM , maximum non repetitive peak reverse voltage V
900 1300 1700
IRRM/IDRM 125C mA
10
Absolute Maximum Ratings
Parameters
IT(AV) Max. Average On-state Current IRMS Max. RMS On-state Current ITSM Max. Peak One Cycle Non-Repetitive Surge Current I2t Max. I2 t for Fusing
30TPS..
20 30 250 300 310 442
Units
A
Conditions
@ TC = 95 C, 180 conduction half sine wave
10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A2 s 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A s
2
I t
2
Max. I t for Fusing
2
4420 1.3 12 1.0 0.5 10 100 200 500 150
t = 0.1 to 10ms, no voltage reapplied @ 20A, TJ = 25C TJ = 125C
VTM rt
Max. On-state Voltage Drop On-state Slope Resistance
V m V mA
VT(TO) Threshold Voltage IRM/I DM Max.Reverse and Direct Leakage Current IH IL Max. Holding Current Max. Latching Current
TJ = 25 C TJ = 125 C
VR = rated VRRM/ VDRM
mA mA V/s A/s
Anode Supply = 6V, Resistive load, Initial IT =1A Anode Supply = 6V, Resistive load
dv/dt Max. Rate of Rise of off-state Voltage di/dt Max. Rate of Rise of turned-on Current
2
30TPS.. SAFEIR Series
Bulletin I2136 04/97
Triggering
Parameters
PGM Max. Peak Gate Power PG(AV) Max. Average Gate Power + IGM Max. Peak Positive Gate Current - VGM Max. Peak Negative Gate Voltage IGT Max. Required DC Gate Current to Trigger
30TPS..
8.0 2.0 1.5 10 60 45 20
Units
W
Conditions
A V mA Anode supply = 6V, resistive load, T J = - 10C Anode supply = 6V, resistive load, TJ = 25C Anode supply = 6V, resistive load, TJ = 125C V Anode supply = 6V, resistive load, TJ = - 10C Anode supply = 6V, resistive load, TJ = 25C Anode supply = 6V, resistive load, TJ = 125C TJ = 125C, VDRM = rated value mA TJ = 125C, VDRM = rated value
VGT
Max. Required DC Gate Voltage to Trigger
2.5 2.0 1.0
VGD Max. DC Gate Voltage not to Trigger IGD Max. DC Gate Current not to Trigger
0.25 2.0
Switching
Parameters
tgt trr tq
Typical Turn-on Time Typical Reverse Recovery Time Typical Turn-off Time
30TPS..
0.9 4 110
Units
s T J = 25C T J = 125C
Conditions
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
30TPS..
- 40 to 125 - 40 to 125 0.8
Units
C
Conditions
RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Max. Thermal Resistance Case to Heatsink wt T Approximate Weight Mounting Torque Min. Max. Case Style
C/W
DC operation
40
0.2
Mounting surface, smooth and greased
6 (0.21) 6 (5) 12 (10)
g (oz.) Kg-cm (lbf-in) Jedec (Modified)
TO-247AC
3
30TPS.. SAFEIR Series
Bulletin I2136 04/97
Maximum Allowable Case Temperature (C)
Maximum Allowable Case Temperature (C)
130
30TPS.. Series R thJC (DC) = 0.8 C/W
130
30TPS.. Series R thJC (DC) = 0.8 C/W
120
Conduction Angle
120
110
Conduction Period
110 30 100 60 90 120 180
100 30 90 60 90 120 0 5 10 15 180 DC 25 30 35
90 0 5 10 15 20 25 Average On-state Current (A)
80 20 Average On-state Current (A)
Fig. 1 - Current Rating Characteristics
Maximum Average On-state Power Loss (W)
Maximum Average On-state Power Loss (W)
Fig. 2 - Current Rating Characteristics
80 DC 180 120 90 60 30
60 50 40 30 20 10 0 0 5 10 15 20 25 30 Average On-state Current (A) 180 120 90 60 30 RMS Limit
60
40 RMS Limit
Conduction Angle
Conduction Period
20 30TPS.. Series T J = 125C 0 0 10 20 30 40 50 Average On-state Current (A)
30TPS.. Series TJ = 125C
Fig. 3 - On-state Power Loss Characteristics
Peak Half Sine Wave On-state Current (A) 280 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. 260 Initial TJ = 125C 240 220 200 180 160 140 120 1 10 100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 4 - On-state Power Loss Characteristics
Peak Half Sine Wave On-state Current (A) 300 280 260 240 220 200 180 160 140 120 0.01 30TPS.. Series 0.1 Pulse Train Duration (s) 1 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T J= 125C No Voltage Reapplied Rated VRRMReapplied
@ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
30TPS.. Series
Fig. 5 - Maximum Non-Repetitive Surge Current
Fig. 6 - Maximum Non-Repetitive Surge Current
4
30TPS.. SAFEIR Series
Bulletin I2136 04/97
1000 Instantaneous On-state Current (A) T J= 25C T J= 125C
100
10
30TPS.. Series 1 0 1 2 3 4 5 6 7 Instantaneous On-state Voltage (V)
Fig. 7 - On-state Voltage Drop Characteristics
Transient Thermal Impedance Z thJC (C/W) 1
D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08
Steady State Value (DC Operation)
Single Pulse 30TPS.. Series 0.01 0.0001
0.001
0.01 Square Wave Pulse Duration (s)
0.1
1
Fig. 8 - Thermal Impedance ZthJC Characteristics
100 Instantaneous Gate Voltage (V)
Rectangular gate pulse a)Recommended load line for rated di/dt: 10 V, 20 ohms tr = 0.5 s, tp >= 6 s b)Recommended load line for <= 30% rated di/dt: 10 V, 65 ohms 10 tr = 1 s, tp >= 6 s
(1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms
(a) (b)
TJ = -10 C
TJ = 25 C
TJ = 125 C
1 VGD IGD 0.1 0.001 0.01
(4)
(3)
(2)
(1)
30TPS.. Series 0.1 1
Frequency Limited by PG(AV) 10 100
Instantaneous Gate Current (A)
Fig. 9 - GateCharacteristics
5
30TPS.. SAFEIR Series
Bulletin I2136 04/97
Outline Table
3. 65 (0 .144) 15.90 (0 .626 ) 15.30 (0 .602 ) 5.70 ( 0.22 5) 5.30 ( 0.208) 20 .30 ( 0.800) 19 .70 ( 0.775) 5.50 ( 0.217) 4. 50 ( 0.17 7) 1 2 3 (2 PLC S.) 3. 55 (0 .139)
DIA.
5.30 ( 0.20 9) 4.70 ( 0.185) 2.5 ( 0.098)
1.5 ( 0.059)
14.80 ( 0.583)
14 .20 (0 .559)
4. 30 (0 .170) 3. 70 (0 .145) 2.20 ( 0.08 7) 2. 40 (0 .095) M AX. 0.80 ( 0.032) 0. 40 (0 .213)
1. 40 (0 .056)
MAX .
1. 00 (0 .039) 10. 94 ( 0.430) 10 .86 ( 0.427)
Dimensions in millimeters and inches
Ordering Information Table
Device Code
30
1 1 2 3 4 5 -
T
2
P
3
S
4
16
5
2 (A)
Current Rating Circuit Configuration: T = Thyristor Package: T = TO-247 Type of Silicon: S = Standard Recovery Rectifier Voltage code: Code x 100 = VRRM 08 = 800V 12 = 1200V 16 = 1600V
1 (K) (G) 3
6

▲Up To Search▲

Price & Availability of 30TPS08

	To Download 30TPS08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .